Configuring Wifi + Generating Activation Code
Turn on or Reboot the Terminal:
- Turn on with the green button - hold for 2 seconds
- Reboot press and hold the # key and yellow key simultaneously until chirp, will reboot if plugged into power, or shut off if on the battery
Activating Move 5000:
- When the Terminal is on the home screen
- Press 0001 on the keypad to open the Admin Menu
- Press 3 - WIFI Parameters
- Press 2 - Scan Networks
- Touch the screen to select your Wifi Network
- Note that only Wi-Fi networks that are password-protected will appear in the available Networks list
- Enter the Wifi Password and press the green key
- You will be taken back to the home screen and it will take a minute for the Wifi connection to complete, you will see the Wifi symbol in the top left of the screen turn orange while connecting and then green when connected
- An Activation Code will then be presented on the screen of the terminal
- Contact us at payments@aurasalonware.com to complete activation
If no Activation Code has been shown after a few minutes, reboot the device by simultaneously pressing the yellow key and # key. Confirm that the Wifi symbol in the upper left is green showing you are connected.
Removing a Network Profile (Wifi Access Point)
- When the terminal is on the home screen
- Press 0001 on the keypad to open the Admin Menu
- Press 3 - WIFI Parameters
- Press 3 - My Networks
- Press Delete all (On the screen)
- Now all Wifi profiles are deleted, you can follow the steps above to connect to Wifi